bad calculation result in "exp" instruction

Report your bugs here.

Moderators: Frank, paul, Hiwot, Chris, peter

tobicitas
Posts: 2
Joined: Tue Mar 01, 2011 11:59 am

bad calculation result in "exp" instruction

Postby tobicitas » Sun Mar 27, 2011 12:06 pm

Hello,

i have set up a simplified simulation modell of a combustion engine.

In an thermodynamic equation I have a "exp(...) function.

After 100s normally running the simulation stops and says:
"bad calculation result in "exp" instruction "


The last calculated value within the "exp" function is 0,586... and therefore there shouldnt be a problem.
What can I do to solve the problen and can the error message be more specified?
I would apreciate a feedback this time....

Thanks a lot

Hiwot
Posts: 26
Joined: Tue Sep 13, 2011 12:50 pm

Re: bad calculation result in "exp" instruction

Postby Hiwot » Wed Sep 14, 2011 2:11 pm

From your description, the problem seems to lie on the argument given for the exp() function during a minor step at the specified time. I would propose monitoring the argument given to the function more closely.

But you are right, the error messege could be a bit more specific. Thanks for the comment :)
If the problem remains unsolved, you can send your model for us to see what else could be a problem.


Return to “Bugs”

Who is online

Users browsing this forum: No registered users and 2 guests